Drilling & Via Formation
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
View detailsThe Pressure Foot Brush Excellon OD28mm (2) is a replacement part for Excellon PCB drilling and routing machines. It belongs to our Pressure Feet & Brushes range and is supplied new, tested and ready to install, so you can restore the machine to its original accuracy without waiting for an OEM back-order.
What the Pressure Foot Brush Excellon OD28mm (2) Does
Pressure feet, bushes and brushes hold the panel flat around the tool and extract chips and dust. A worn foot or brush causes burrs, entry-side damage and poor dust extraction.
Product Details
Model
WETMS-003
Size
Φ39*Φ19
Application
Taliang Routing Machine
Frequently Asked Questions
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: If machines, it will be about 10~15 working days. If spares, it will be about 2~3 working days after payment.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
When to Replace It
- Burrs or lifted copper on the entry side
- Dust left on the panel after drilling
- Bristles worn, uneven or melted
- Cracked or deformed foot body
How to Confirm Compatibility
Before ordering, please check or send us:
- Machine brand and spindle model
- Outer diameter and bush hole size
- Brush length and bristle type
- Vacuum fitting compatibility
Looking for complete machines? See our Drilling & Via Formation and Profiling & Routing.
Technical Questions
Is the Pressure Foot Brush Excellon OD28mm (2) new or refurbished?
The item is supplied in new retails condition. Every part is inspected before it is packed.
Which machines is the Pressure Foot Brush Excellon OD28mm (2) compatible with?
It is designed for Excellon PCB drilling and routing machines. Send us the machine model and the original part number (this item: Excellon Brush) and we will confirm the fit before shipment.
When should the Pressure Foot Brush Excellon OD28mm (2) be replaced?
Typical signs are: burrs or lifted copper on the entry side; dust left on the panel after drilling; bristles worn, uneven or melted; cracked or deformed foot body.
What information do you need to quote the Pressure Foot Brush Excellon OD28mm (2)?
Please provide: machine brand and spindle model, outer diameter and bush hole size, brush length and bristle type, vacuum fitting compatibility. Photos of the installed part also help.
Sources & References
- IPC-A-600: Acceptability of Printed Boards
- IPC-6012: Qualification and Performance Specification for Rigid Printed Boards
- Photo Chemical Machining Institute — process capability guidelines
- NIST Engineering Statistics Handbook — process tolerance and capability
Standards are referenced for context. Always confirm parameters against the current published edition and your own process validation.
