WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine

WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine

WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine

WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine

Drilling & Via Formation
Get a Quote

Description

WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine

Key Design and Performance Highlights:

Four-Spindle Productivity — 2 high-frequency ball-bearing spindles (60,000 rpm standard; 125,000 rpm optional.

X/Y/Z Linear Motor Drive — Higher acceleration, smoother motion and higher long-term accuracy .

Granite Machine Body — 000-grade precision granite, providing superior vibration damping and long-term thermal stability.

20 Tools per Spindle — 2 × 10-tool automatic tool magazines (total 20 tools), ATC in under 10 seconds

Windows 10 Control System—Closed-loop position feedback running WET V10.0 software on Windows 10 IoT Enterprise LTSC

Fully compatible — Excellon, Siebold & Meyer drill files, Gerber and standard NC programs.

Multi-Material Capability — handles FR-4, CEM-1/3, aluminum MCPCB, copper-based PCB and other common PCB substrates

Multi-Panel Stack Drilling — up to 3 panels of standard FR-4 simultaneously, depending on panel thickness.

General Parameters

Motion & Mechanical System

Spindle & Tooling

Automation, Control & Software

Utilities & Environment

Frequently Asked Questions

What does the WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine do in the production line?
The WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine performs a dedicated step in PCB fabrication. Correct placement relative to the upstream and downstream stages is what protects overall yield, cycle time, and cost per panel, so it is normally specified together with the cells immediately before and after it.
Can the WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine be customised for our process?
Yes. Conveyor width, tooling, control options, and the surrounding handling can be adapted to your panel size, throughput target, and facility constraints. Share your specification and we will propose a configuration.
What are the utility requirements for the WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine?
Electrical supply is specified at 2.5 kW. Compressed air, water, and exhaust connections are detailed in the installation drawing supplied before delivery.
What throughput can the WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine achieve?
Typical throughput is 20 tools per spindle. Actual figures depend on material thickness, feature density, and the quality target, so treat the rated value as a planning baseline rather than a guarantee.

Sources & References

Standards are referenced for context. Always confirm parameters against the current published edition and your own process validation.

D
Reviewed by
Chief Engineer, Wet Etching · WET Etched
Ph.D., Metallurgical & Chemical Engineering, Xiamen University

Technical Parameters

No. of Spindle2
Spindle Speed60k rpm / min
Processing area of each axis650mm×750mm
Number of tools per axis20 pcs
Routing diameterφ0.6-φ3.175mm :
ParameterSpecification
ModelWET-AS-2LH
Machine Type2-Spindle CNC PCB Drilling & Routing Machine
ApplicationDrilling & routing of PCBs (FR-4 single / double / multilayer, Aluminum MCPCB, Copper-based, CEM, etc.)
Machining Range (per spindle)X 650 × Y 750 × Z 100 mm
Machine Footprint (L × W × H)2,320 mm × 1,900 mm × 2,100 mm
Machine WeightApprox. 3,000 kg (base + gantry, granite construction)
Standard Drive System (X / Y / Z)X / Y / Z linear motors with high-resolution linear encoders, full closed-loop control
GuidewaysHIWIN linear guideways
X / Y Rapid Traverse SpeedUp to 45 m/min
Z-axis Stroke100 mm
Machine BodyHigh-grade 000 granite (base + gantry)
Positioning Accuracy (X / Y / Z)±0.005 mm ; ±0.003 mm
Repeat Positioning Accuracy±0.003 mm
Routing Accuracy±0.05 mm
Spindle Count2 pcs
Spindle TypeKL-60AK2 high-frequency ball-bearing spindle
Spindle Power2.5 kW
Drill Diameter Rangeφ0.4 mm – φ6.4 mm
Routing Cutter Diameterφ0.6 mm – φ3.175 mm
Tool Magazine Capacity20 tools per spindle
Tool Change Time≤ 10 seconds (ATC, automatic)
Shaft Clamping MethodPneumatic clamping for tool
Tool Detectorlaser tool measures ,tool length, diameter and run-out
Control SystemWET V10.0 closed-loop CNC
Operating SystemWindows 10 IoT Enterprise LTSC 64-bit
Industrial PCIndustrial-grade IPC + dedicated motion controller
Front DoorAutomatic lifting and closing
Tool Stripping SystemPneumatic automatic ejecting device
Broken-Tool DetectionReal-time, all spindles
Program CompatibilityExcellon, Siebold & Meyer formats, Gerber, standard NC drill / route files
PCB Stack CapabilityUp to 3 panels of standard-thickness FR-4 (depends on panel thickness)
Power SupplyAC 380 V ± 10%, 50/60 Hz, 3-phase
Total Installed Power≈ 3 kVA (standard)
Air Pressure Requirement≥ 6 kg/cm²
Dust Extraction (Vacuum)External industrial vacuum required (recommended 3 HP or larger); buyer-supplied
ChillerIncluded (water chiller for spindles)
Operating Temperature25 ± 5 °C (recommended workshop environment)
Ambient Humidity40 % – 70 % RH, non-condensing