Drilling & Via Formation
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
View detailsThe Pressure Foot Brush Taliang SC-63 Type B fits Taliang PCB drilling and routing machines. As a specialist supplier of PCB machine spares, we keep it in our Pressure Feet & Brushes stock and ship it worldwide by express, with technical support to confirm compatibility before you order.
What the Pressure Foot Brush Taliang SC-63 Type B Does
Pressure feet, bushes and brushes hold the panel flat around the tool and extract chips and dust. A worn foot or brush causes burrs, entry-side damage and poor dust extraction.
Product Details
Model
WETMS-003
Size
Φ39*Φ19
Application
Taliang Routing Machine
Frequently Asked Questions
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: If machines, it will be about 10~15 working days. If spares, it will be about 2~3 working days after payment.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
When to Replace It
- Burrs or lifted copper on the entry side
- Dust left on the panel after drilling
- Bristles worn, uneven or melted
- Cracked or deformed foot body
How to Confirm Compatibility
Before ordering, please check or send us:
- Machine brand and spindle model
- Outer diameter and bush hole size
- Brush length and bristle type
- Vacuum fitting compatibility
Looking for complete machines? See our Drilling & Via Formation and Profiling & Routing.
Technical Questions
Do you supply other spare parts for the same machine?
Yes. We supply collets, spindles and shafts, air bearings, pressure feet and brushes, cylinders, sensors, tool magazines, drill and router bits, and backup and entry boards for PCB drilling and routing machines.
Is the Pressure Foot Brush Taliang SC-63 Type B new or refurbished?
The item is supplied in new retails condition. Every part is inspected before it is packed.
What information do you need to quote the Pressure Foot Brush Taliang SC-63 Type B?
Please provide: machine brand and spindle model, outer diameter and bush hole size, brush length and bristle type, vacuum fitting compatibility. Photos of the installed part also help.
When should the Pressure Foot Brush Taliang SC-63 Type B be replaced?
Typical signs are: burrs or lifted copper on the entry side; dust left on the panel after drilling; bristles worn, uneven or melted; cracked or deformed foot body.
Sources & References
- IPC-A-600: Acceptability of Printed Boards
- IPC-6012: Qualification and Performance Specification for Rigid Printed Boards
- Photo Chemical Machining Institute — process capability guidelines
- NIST Engineering Statistics Handbook — process tolerance and capability
Standards are referenced for context. Always confirm parameters against the current published edition and your own process validation.
