
WET-AS-6ZH 6 Spindles PCB Drilling and Routing Machine
WET-AS-6ZH 6 Spindles PCB Drilling and Routing Machine
View details
PCB Excellon spindle ABW 110 spare parts could be offered such as the spindle shaft, stator, bearings, collets etc.
The Excellon Air Bearing Spindle Shaft ABW110 is a replacement part for Excellon PCB drilling and routing machines. It belongs to our Bearings range and is supplied new, tested and ready to install, so you can restore the machine to its original accuracy without waiting for an OEM back-order.
Air-bearing components (front, rear and thrust bearings) float the high-speed spindle shaft on a thin air film. Their clearance defines stiffness, run-out and maximum RPM of the spindle.
PCB Excellon spindle ABW 110 spare parts could be offered such as the spindle shaft, stator, bearings, collets etc.
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: If machines, it will be about 10~15 working days. If spares, it will be about 2~3 working days after payment.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
Before ordering, please check or send us:
Looking for complete machines? See our Drilling & Via Formation and Profiling & Routing.
Standards are referenced for context. Always confirm parameters against the current published edition and your own process validation.
| Model | Spindle Shaft ABW110 |
|---|---|
| Condition | NEW |
| Application | for Excellon Spindle ABW110 |
| Lead Time | 2-3 working days |
| Applictaion | for Excellon ABW110 |
| Laed Time | 2-3 working days |
Parts like the Excellon Air Bearing Spindle Shaft ABW110 are used on PCB drilling and routing machines. Browse matching machines in Drilling & Via Formation · Profiling & Routing.

WET-AS-6ZH 6 Spindles PCB Drilling and Routing Machine
View details
Engineer-configured drilling & via formation equipment for consistent results across rigid, multilayer, and HDI boards.
View details
Built-to-spec drilling & via formation system for fabricators who need repeatable yield and predictable cycle times.
View details