Drilling & Via Formation
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
WET-AS-2LH 2 Spindles PCB Drilling and Routing Machine
View detailsThe Taliang TL60 Brush Type B fits Taliang PCB drilling and routing machines. As a specialist supplier of PCB machine spares, we keep it in our Pressure Feet & Brushes stock and ship it worldwide by express, with technical support to confirm compatibility before you order.
What the Taliang TL60 Brush Type B Does
Pressure feet, bushes and brushes hold the panel flat around the tool and extract chips and dust. A worn foot or brush causes burrs, entry-side damage and poor dust extraction.
Product Details
All kinds of PCB brushes could be provided for your CNC PCB drilling/routing machine
Frequently Asked Questions
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: If machines, it will be about 10~15 working days. If spares, it will be about 2~3 working days after payment.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
When to Replace It
- Burrs or lifted copper on the entry side
- Dust left on the panel after drilling
- Bristles worn, uneven or melted
- Cracked or deformed foot body
How to Confirm Compatibility
Before ordering, please check or send us:
- Machine brand and spindle model
- Outer diameter and bush hole size
- Brush length and bristle type
- Vacuum fitting compatibility
Looking for complete machines? See our Drilling & Via Formation and Profiling & Routing.
Technical Questions
Which machines is the Taliang TL60 Brush Type B compatible with?
It is designed for Taliang PCB drilling and routing machines. Send us the machine model and the original part number (this item: PCB Pressure Foot Brush TL60) and we will confirm the fit before shipment.
Do you supply other spare parts for the same machine?
Yes. We supply collets, spindles and shafts, air bearings, pressure feet and brushes, cylinders, sensors, tool magazines, drill and router bits, and backup and entry boards for PCB drilling and routing machines.
When should the Taliang TL60 Brush Type B be replaced?
Typical signs are: burrs or lifted copper on the entry side; dust left on the panel after drilling; bristles worn, uneven or melted; cracked or deformed foot body.
Is the Taliang TL60 Brush Type B new or refurbished?
The item is supplied in new retails condition. Every part is inspected before it is packed.
Sources & References
- IPC-A-600: Acceptability of Printed Boards
- IPC-6012: Qualification and Performance Specification for Rigid Printed Boards
- Photo Chemical Machining Institute — process capability guidelines
- NIST Engineering Statistics Handbook — process tolerance and capability
Standards are referenced for context. Always confirm parameters against the current published edition and your own process validation.
